RaptClub / Collections

Short Suit in jet black latex, front view

Short Suit in jet black latex, three-quarter view

Images are for reference only. Details of the actual piece may vary slightly.

Short Suit

Name: Short Suit
Brand: RaptClub
SKU: RC-CS-004-A
Price: 289.00 USD
Availability: InStock

From $289.00

The shortest one-piece in the line: a round neck, short sleeves to mid-bicep and legs that end above the knee, finished at sleeve and leg on flat bonded hems.

Made to order. Every piece is cut and bonded to the specification you set here.

Size

Size guide

Measurements are body measurements in centimeters. Latex is cut smaller than the body and stretches onto it, so choose the size your own measurements fall into rather than sizing up.

Size	Height	Neck	Shoulder width	Chest	Waist	Hip	Thigh	Knee	Calf	Ankle	Upper arm	Elbow	Forearm	Wrist	Arm length	Waist to ankle	Inside leg	Torso loop
XS	165	36	42	84-88	74-78	84-88	51	37	35	20	29	25	24	17.5	55.5	93.5	67	146.5
S	170	37	43	88-92	78-82	88-92	53	38	36	21	30.5	26	25	18	55.5	94.5	67	150.3
M	175	38	44	92-96	82-86	92-96	55	39	37	22	32	27	26	18.5	57	97	68.5	154
L	180	39	45	96-100	86-90	96-100	57	40	38	23	33.5	28	27	19	58.5	99.5	70	157.8
XL	185	40	46	100-104	90-94	100-104	59	41	39	24	35	29	28	19.5	60	102	71.5	161.5
XXL	190	41	47	104-108	94-98	104-108	61	42	40	25	36.5	30	29	20	61.5	104.5	73	165.3

Latex has significant stretch, so finished measurements carry a small tolerance.

Made to measure for a height over 190 cm, a chest or waist over 100 cm or a weight of 100 kg or more is priced 15% higher, for the extra sheeting.

Sheeting

The mill the sheeting comes from and its thickness. Thickness changes how the piece hangs and how easy it is to dress.

House sheeting, 0.40 mm +$0The entry specification. Heavier hand, more body in the drape, more forgiving to dress.House sheeting, 0.25 mm +$0Lighter and closer to the body, with more sheen movement and a softer fall.Radical Rubber, 0.25 mm +$80Premium British sheeting. The most consistent color and surface at the lightest weight.Radical Rubber, 0.40 mm +$80Premium British sheeting at the heavier gauge. The most durable specification offered.

Finish on dispatch

How the piece is prepared before it is packed.

Powdered +$5Dressing powder applied to the inside so the garment can be put on immediately.Polished +$5A silicone film applied to the outside and buffed, so the piece arrives at full shine.Unfinished +$0Shipped clean and untreated. Powder or polish before first wear; an untreated surface will stick to itself in storage.

Your measurements

All values in centimeters, weight in kilograms. Measure over close-fitting underwear, keep the tape level and snug without pulling it in, and take each measurement twice.

Made to measure for a height over 190 cm, a chest or waist over 100 cm or a weight of 100 kg or more is priced 15% higher, for the extra sheeting.

Pattern baseThe block we draft from. Choose whichever is closer to your proportions.

1 HeightStand against a wall without shoes. Mark the wall level with the top of your head and measure to the floor.

2 WeightYour weight in kilograms, without shoes. It tells us how much sheeting the piece needs.

3 NeckAround the middle of the neck, tape level. Keep one finger under the tape.

4 Shoulder widthFrom the bony point at the end of one shoulder, across the back over the bump at the base of the neck, to the point of the other shoulder. Ask someone to help if you can.

5 ChestAround the fullest part of the chest, tape level front and back, arms down.

6 Chest heightFrom the neck-shoulder point — the side of the neck root, where the shoulder begins — straight down to the fullest point of the chest.

7 WaistAround the natural waist, the narrowest point above the hip bones. Do not pull the tape in.

8 AbdomenLevel, three centimeters below the navel. Stand normally; do not hold your stomach in.

9 HipAround the fullest part of the seat, feet together.

10 Shoulder to waistVertical, from the neck-shoulder point straight down to the waistline.

11 Shoulder to hipVertical, from the neck-shoulder point straight down to the line where the hip is fullest.

12 Shoulder to kneeVertical, from the neck-shoulder point straight down to the middle of the kneecap.

13 Torso loopOne continuous loop from the hollow between the collarbones, down the front, between the legs and back up to the bump at the base of the neck. Keep the tape taut. This is the measurement that decides whether a one-piece is comfortable to stand up in.

14 Arm lengthFrom the bony point at the end of the shoulder, down the outside of a slightly bent arm, to the wrist bone.

15 Upper arm lengthFrom the point of the shoulder to the bend of the elbow.

16 ArmholeAround the armhole: through the armpit and over the point of the shoulder, back to the start.

17 Upper armAround the fullest part of the upper arm, arm relaxed at your side.

18 ElbowAround the elbow joint with the arm straight.

19 ForearmAround the widest part of the forearm below the elbow.

20 WristAround the narrowest part of the wrist, where a watch sits.

21 Inside legOn the inner thigh, from the crotch straight down to the ankle bone.

22 Lower leg lengthFrom the ankle bone up to the line of the knee, on the inside of the leg.

23 Thigh rootAround the very top of the thigh, hard against the body.

24 ThighAround the thigh, seven centimeters below the top.

25 KneeAround the middle of the kneecap with the leg straight.

26 CalfAround the fullest part of the calf.

27 AnkleAround the narrowest point just above the ankle bone.

28 Waist to ankleDown the outside of the leg from the natural waist to the ankle bone.

Every piece is final sale unless it is faulty, damaged or not made as ordered, and an order cannot be canceled or changed once it is paid, so check each figure before you order.

Configured price$289.00

Made to order in 18 to 25 business days, then shipped.

Final sale. Returns and exchanges are accepted only if an item arrives faulty, damaged or incorrect. Your statutory rights are not affected. Returns and Refunds

SKU: RC-CS-004-A Classification: One-Pieces

Product Notes
Specifications

The one-piece line at its most compact. The neckline is a plain round neck at the base of the throat, the sleeve stops at mid-bicep and the leg ends above the knee, leaving the forearm and lower leg free. Both finish on flat bonded hems.

Through the torso it is cut as close as the Catsuit, with every seam bonded. It closes as standard with a zip down the back, nape to waist. Front-zip, through-the-rise, rise-zip and neck-entry layouts are offered as alternatives.

As the arms and legs finish early, gloves and socks are not offered. Sheeting and colorway come from the full range and the finish is your choice; sizes run XS to XXL, or the suit is made to your own measurements.

Standard sizes: please check your measurements carefully against the size guide before ordering.

Material	Natural rubber latex, house sheeting 0.40 mm; house 0.25 mm and Radical Rubber 0.25 or 0.40 mm available
Construction	Cut and bonded seams; round neck, short sleeves to mid-bicep and legs above the knee on flat bonded hems
Leg length	The leg ends above the knee
Closure	Back zip from the nape to the waist, black tape and pull as standard; front zip, through-the-rise, rise-zip and neck-entry layouts available
Sizes	XS–XXL, or made to measure
Colors	45 colorways across solid, metallic, pearlescent, iridescent and transparent; shown in Jet Black
Finish	Unfinished as standard; powdered or polished before dispatch
Care	Rinse after wear in lukewarm water; dry away from heat and sunlight; see the care guide
Note	Contains natural rubber latex. Do not wear if you are allergic to latex.

Short Suit

Size guide

Measuring guide

Basics

Torso

Arm

Leg

Head

Hand

Foot

Short Suit

Related products

Catsuit

Hooded Catsuit

Sleeveless Catsuit